The B-150XS is filled with advanced solutions which all share the goal of giving you even more musicality and flexibility. The output stage uses Densen’s unique DMCD (Densen Mass Current Distribution) technology that secures an extremely firm grip on the speakers combined with a fast, precise and truly transparent sound.
As the B-150XS is a wide bandwidth design it goes to 400.000 Hz, resulting in improved slew-rate.
The new reference integrated amplifier from Densen is perhaps the most advanced integrated amp on the market. It is filled with advanced solutions, which all share the goal of giving you even more musicality and flexibility.
Highlights
The integrated Densens are built to perform and are crafted with the same care and technology as their separate siblings. Each unit is the result of perfect craftmanship.
。Build using DMCD Technology – Densen Mass Current Distribution
。Relay controlled volume attenuator with 200 steps (0.5 dB)
。Insanely overpowered 750 VA toroidal power supply.
。130.000 µF capacitor bank made with custom Densen capacitors
。Expansion port for DP-07 phono board – turn your line-1 input into a phono-input.
。Expansion port for future upgrades (DAC, Surround, Streaming)
。Upgradeable with external power supply (1NRG)
。Designed in Denmark – Made in Denmark
Discription
The volume is controlled by an extremely precise attenuator made of Vishay metal film resistors, which is switched by relays controlled by the microprocessor. Compared to a normal volume potentiometer of the kind used in the majority of all preamps, the resistor network has virtually no self induced noise and an extremely low distortion. This results in an unsurpassed precision and refinement, and the attenuator contains no less than 200 steps! This makes it possible to adjust the volume very precisely (0.5 dB) even when the sound is so low that an ordinary volume control would create an uneven balance between left and right.
The B-150XS is built using surface mounting techniques, and the components are mounted with a precision of 0.02mm (!) using silver solder. All solderings are made in an artificial atmosphere, consisting of nitrogen, to avoid oxidation of the solderings. The power supply is massive, consisting of a 750 VA transformer and having a storage capacity of 130.000 µF with 4 separate rectifiers, two of which are capable of 3.000 VA. Unusually for an amplifier, not all of the capacitors are mounted in a capacitor bank, as some of them are located directly adjoining the output stage for faster power delivery. All resistors are laser trimmed metal film from Vishay with a precision of 0.1 %. The B-150XS delivers 100 W in 8 ohm and 200 W in 4 ohm.
The transformer is custom-made for the B-150XS, and is winded using a new technique. This technique reduces vibration from the transformer and therefore reduces mechanical noise from the cabinet. At the same time, this prevents mechanical vibrations from reaching the delicate audio signals on the PCB. It also works as an isolation transformer, thereby eliminating the need to use separate power conditioners.
The special winding techniques used also ensure that the transformer modulates less than is normal (for other amplifiers) during the delivery of large amounts of current. Transformers normally lower the voltage during the delivery of large amounts of current which results in compression of the signal’s dynamics. As a result of the new winding method the transformer in the B-150XS is extremely stiff, which means that the voltage does not drop under large current deliveries.
The printed circuit board is made of Teflon, and is double sided to allow for the signal on one side and the ground plane on the other, thereby optimising interference free signal transfer.
The B-150XS contains sockets for the SB Board for surround, DP-03 and DP-06 MM and MC stages. There is also the possibility of upgrading the B-150XS with the 1NRG external power supply to further enhance the sound quality, so as to experience truly breathtaking musical experiences. The B-150XS is also prepared for the SAXO electronic crossover, so that the B-150XS can be used in active systems. This is done by mounting the crossover internally in the B-150XS in a socket. The SAXO electronic crossover will fit all passive speakers on the market.
The DenLink system implemented in all Densen products allows 2-way communication in multiroom installations. On the B-150XS, the link system will allow the user to power up a link amplifier in the kitchen, or another room, and then control the main system in for example the living room, sending the signals to and from the kitchen, for playback in another room. It will be possible to have full display information in another room, with status on all products. The DenLink / Multiroom system is also prepared for controlling the lights, so you will be able to dim them.
Specs & Features
。Power output in 8 ohms: 2 x 100 W
。Power output in 4 ohms: 2 x 200 W
。3 – line inputs + 1 tape in/output
。2 pre-amp outputs for bi-amp wiring
。Processor-loop for use as power amp in a home theater setup
。ERP input for use with external Densen power supplies (1NRG)
。Expansion port for use with expansion modules (Surround board, DAC boards, streaming boards)
。Internal DP connector – connect a DP module and turn line 1 into a phono input (DP-07 MM module)
。Gizmo system remote compatible
。SAXO compatible
。Power supply size: 750 VA
。Storage capacity: 130.000 µF
。THD + Noise @ rated output: less than 0.05 %
。Frequency response: 2 - 500.000 Hz
。Weight: 14 kg
。Dimensions (W x D x H): 440 x 310 x 64 mm
。Designed and Made in Denmark
1504191160
